Ground-mounted solar means photovoltaic racking set directly on the earth rather than on a roof. That's good for access, but the panels and wiring end up within reach of children, pets, mowers and wildlife. A fence solves that, as long as it's planned around the array rather than simply added afterward.
Why fence an array at all?
Ground-mounted panels often have exposed wiring on the back, sometimes at a height a child or a dog can reach. A fence keeps people, pets and mowers at a distance. Whether your system or your local rules actually require one depends on the installation, so ask your solar installer and check with the local building department before you decide on a design.
Shade is the first thing to check
A fence can cast a shadow across the bottom row of panels, especially in winter when the sun sits low. Solid privacy fencing is the worst offender. On most arrays, an open style like aluminum or coated chain link, set well back from the panels, is the safer choice. Ask your installer how much clearance your array needs, and we'll lay out the fence to match.
Lutz lots and lake edges
Larger lots around Lutz give you room for an array, but also bring lake edges, wet ground and trees to plan around. Walk the spot with us after a heavy rain if you can. It tells you where water sits, and that affects posts and gates. Check your community's rules too, if you have an HOA, because they may want screening or a certain style.
Leave room to work
Your solar company will need to get in, and so will your mower. Weeds and tall grass can shade panels just as a fence can, so a clear strip inside the fence is useful. We plan gates wide enough for whatever needs to reach the array, and that strip wide enough to mow.
What's under the ground
A buried line usually runs from the array back to the house. Call 811 before any digging, but remember that utilities mark public lines, and Sunshine 811 says it's the owner's job to have private lines marked (Sunshine 811). Get the wiring plan from your installer, and consider a private locator if you don't have one.
Keep the fence separate
We set the fence on its own posts and don't attach anything to the racking. If you're using a metal fence close to the array, ask your solar installer or electrician whether it needs to be bonded or grounded. That's an electrical question, and they should answer it.
